ORIGINAL FEED
7. ORIGINAL FEED
7.1 ORIGINAL PICK-UP MECHANISM
[A]
[C]
[B]
[D]
A662D502.img
After setting the originals on the original table, the originals contact the feeler
[A] of the original set sensor and cause the feeler to move out of the sensor.
The DF CPU then sends the original set signal to the copier CPU to inform it
that the document feeder will be used. When the
key is pressed, the
pick-up solenoid [B] is energized. The original stack is then pressed between
the pick-up lever [C] and pick-up roller [D]. The rotation of the pick-up roller
advances the bottom original.
SM
9-7
A202/A203