Ricoh A151 Field Service Manual page 73

Mode No.
67 Vr Ratio Display Displays the present Vr ratio.
68 Vr Forced
Detection
69 OPC Counter
78 Auto Energy
Saver Mode
79 Fusing
Temperature
Adjustment
(Maximum
temperature
during copying)
80 Open
83 Toner End
Counter Clear
86 Energy Saving
Ratio
87 PM Interval
Setting
88 PM Counter
Display
89 PM Counter
Clear
FSM
Function
L = Vrp/Vsg x 100
L (%) Grid voltage
100 to 84 Vo
83 to 58 Vo–40V
57 to 41 Vo–80V
40 to 28 Vo–120V
27 to 0 Vo–160V
Refer to NOTE 3 for FT3013 copier.
Detects Vrp and perform Vr correction.
1. Turn off the DPS 101-2 after pressing the
Auto
Image Density key if it is on.
2. Make 5 copies.
Shows the total number of copies made with the
drum installed on the machine.
Refer to NOTE 5.
Selects the "Automatic Energy Saver" mode.
The copier automatically goes to Energy Saver
mode at the auto reset time selected (SP15).
Adjusts the maximum temperature of the hot
roller during copying.
188°C to 202°C in 1°C steps.
Refer to NOTE 3 for FT3013 copier.
No function.
Clears the toner end counter (SP58). Resets the
used toner overflow condition (E70) if it is
detected.
This mode must be performed when the used
toner tank is cleaned.
Selects energy saving ratio.
The greater the saving ratio, the longer the
waiting time until the copier returns to the ready
condition.
Saving Ratio Waiting Time
0: 56% 25 sec.
1: 47% 19 sec.
2: 37% 12 sec.
3: 25% 5 sec.
Sets the interval of the PM counter.
Displays contents of the PM counter.
Refer to NOTE 5. When the PM counter
exceeds to the selected setting of SP87, the
Magnification indicator (FT3213 copier) or the
Copy Counter (FT3013 copier) blinks.
Resets the PM counter.
Use this mode after performing PM.
4-17
Data
0–100
0: No
1: Yes
0: No
1: Yes
188–202°C
Default=198°C
0: No
1: Yes
0: 56%
1: 47%
2: 37%
3: 25%
0: No PM
1: 40K
2: 60K
3: 80K
4: 100K
0: No
1: Yes
A151/A152