Ricoh A151 Field Service Manual page 317

Rev. 5/30/97
Mode No.
Auto Shut Off
Time (Energy
15
Saver Mode)
Count Up/Down Selects count up or count down.
16
17 Open
Key
18 Function (A203
copier only)
ADS Priority
19


SADF Shut off
Time (A203
22
copier only)
Fusing
Temperature
29
Control
Toner Supply
30
Mode
Toner Supply
Ratio
31
(Detect Mode)
Toner Supply
Ratio
32
(Fixed Mode)
ID Sensor Bias
33
ADS Level
34
ID Detection
Interval
35
SM
Function
Selects an auto reset time of 1 or 3 minutes, or
cancels this mode.
The copier automatically goes to the energy
saver mode at the selected reset time if SP78 is
at "1".
No function.
Specifies whether reduction or enlargement is
selected first when the
Specifies whether the copier defaults to ADS or
manual mode when the main switch is turned on.
Selects the shut off time for SADF mode.
The DF must be installed on the machine.
Selects the fusing temperature control mode.
After selecting the control mode and turning the
main switch off/on, the fusing temperature
control mode is changed.
Selects the toner supply system.
See SP31/SP32 for the toner supply amount.
Determines how much toner is supplied in detect
mode.
Determines how much toner is supplied in fixed
mode.
Sets the bias voltage applied to the development
roller for the ID Sensor Pattern.
0: Vo
1: Vo+40 V
2: Vo–20 V
3: Vo–40 V
Selects the image density level in ADS mode.
setting: 1
Increases grid voltage (–40 V). Development
bias voltage is not changed.
setting: 2
Increases development bias voltage (–40 V).
Grid voltage is not changed.
ID sensor check is performed every 5 copies or
10 copies.
If low image density occurs in the near end
condition, change the setting to "1".
8-39
SERVICE PROGRAM MODE
0: 1 min.
1: 3 min.
2: None
0: Up
1: Down
0: Reduction
key is pressed. 1: Enlargement
0: ADS
1: Manual
0: 5 s
1: 60 s
0: ON/OFF
1: Phase
0: Detect Mode
1: Fixed Mode
0: 15%
1: 7%
2: 30%
3: 60%
0: 7.0%
1: 3.5%
2: 10.5%
3: 14.0%
Toner Density
0: Normal (Vo)
1: Low
2: High
3: Higher
0: Normal
1: Darker
2: Lighter
0: 10 copies
1: 5 copies
Settings
control
control
A202/A203