Ricoh A151 Field Service Manual page 271

A202/A203 and A151/A152 SP Mode Differences Table
1. New SP Modes for the A202/203
No. Model Name
22 SADF Shut off Time (A203 copier only)
49 Fusing Temperature Adjustment
59 Optics Temperature Display
71 V Correction Selection
L
77 Auto Shut Off (Energy Star) On/Off
80 Horizontal Edge Margin Width Adjustment
81 Factory Initialization
97 Service Call (E52, E53, E55)
111 Total Service Calls
2. Eliminate SP Modes compared to the A151/A152
No. Model Name
12 220 ~ 230 V/240 Conversion
17 Open
39 Exposure Lamp ON
67 V Ratio Display
R
68 V Forced Detection
R
79 Fusing Temperature Adjustment
87 PM Interval Setting
88 PM Counter Display
89 PM Counter Clear
91 Optics Cooling Fan Operation (A151
copier only)
93 Maximum Copy Quantity
111 Number of Misfeeds by Location
120 Total Service Calls
121 Optics Section Service Calls
122 Exposure Lamp Service Calls
123 Open
124 Fusing Section Service Calls
125 DF Communication Service Calls
SM
Comment
Same as A151/A152
A151/A152 clears the E5 conditions by
turning off on the DPS101-1.
Same as the A151/A152
Comment
The ac drive board is designed for 230V
Can not be entered.
Does not perform this program at the
factory.
Vr correction not performed.
Vr correction not performed.
Same as A202/A203 SP49.
Eliminated due to small capacity of
EEPROM.
Eliminated due to small capacity of
EEPROM.
Eliminated due to small capacity of
EEPROM.
No need for this function.
Eliminated due to small capacity of
EEPROM.
Eliminated due to small capacity of
EEPROM.
Same as A202/A203 SP111
Eliminated due to small capacity of
EEPROM.
Can not be entered.
Eliminated due to small capacity of
EEPROM.
Eliminated due to small capacity of
EEPROM.
3
Rev. 5/31/97
A202/A203