8. Remove the T/S power pack [A] from the transport unit [B] (4 screws).
NOTE: a) When reinstalling the transport unit in the copier, make sure
the front [C] and rear [D] hooks are positioned correctly as
shown.
b) When reinstalling the transport unit, make sure that the relay
harness [E] does not catch in the transport unit and is
positioned correctly as shown.
9. Adjust the transfer and separation corona currents. (See Transfer
Corona Current Adjustment and Separation Corona Current Adjustment.)
A151/A152
[B]
[A]
[C]
5-54
[D]
[E]
FSM