Sensor (Stapler Bin Full Receive) Removal - Lexmark XM3250 Service Manual

Sensor (stapler bin full receive) removal

1
Remove the right cover. See
2
Remove the left cover. See
3
Remove the rear cover. See
4
Remove the stapler service cover. See
5
Disconnect the sensor cable CN18 from the stapler controller board.
6
Remove the two screws (A) from the top cover.
"Stapler right cover removal" on page
"Stapler left cover removal" on page
"Stapler rear cover removal" on page
"Stapler service cover removal" on page
Parts removal
352
328.
329.
337.
341.
7018