Operation Panel - Mitsubishi Electric FR-F720P-0.75K Instruction Manual

1.2 IPM motor control setting by selecting the parameter setting mode on the

operation panel (

POINT
· The parameters required to drive an IPM motor are automatically changed as a batch. (Refer to page 3.)
Operation Initialize the parameter setting for a premium high-efficiency IPM motor (MM-THE4 (1500r/min)
example specification) by selecting the parameter setting mode on the operation panel.
1.
Screen at power-ON
The monitor display appears.
2.
Parameter setting mode
Press
mode.
3.
Selecting the parameter
Turn
initialization) appears.
4. D
isplaying the setting
Press
" " (initial value) appears.
5. Select
Turn
6.
Parameter setting
Press
Turn
Press
Press
Setting
0
1
12
22, 32
REMARKS
· Performing IPM parameter initialization by selecting the parameter setting mode on the operation panel automatically
changes the Pr. 998 IPM parameter initialization setting.
· The IPM parameter setting is displayed as "1 or 12" in the parameter setting mode even if Pr. 998 IPM parameter
initialization = "101 or 112."
)
Operation
to choose the parameter setting
until (IPM parameter
to read the currently set value.
ing the setting
to change it to the set value "
to set.
to read another parameter.
to show the setting again.
twice to show the automatic parameter setting (AUTO).
Parameter settings for a general-purpose motor
Parameter settings for a high-efficiency IPM motor MM-EF(rotations per minute)
Parameter settings for a premium high-efficiency IPM motors MM-EFS and MM-THE4
(rotations per minute)
For manufacturer setting. (Do not set.)
".
Flicker ... Parameter setting complete!!
P.RUN indicator is lit.
Description
2/8
Display
The parameter
number read
previously appears.
BCN-C22005-639