Download  Print this page

Basic Operation (factory Setting) - Mitsubishi Electric FR-F720P-0.75K Instruction Manual

Fr-f700p series.
Hide thumbs



Basic operation (factory setting)

Operation mode switchover
At power-ON (External operation mode)
PU operation mode
(output frequency monitor)
Parameter setting mode
Value change
(Refer to page 51)
Output current monitor
Value change
Parameter clear
Initial value change list
Automatic parameter
[Operation for displaying faults history]
The past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
While a fault is displayed:
The display shifts as follows by pressing
Output current
Output voltage
(After Energization time, it goes back to a fault display.)
Pressing the setting dial shows the fault history number.
Operation panel (FR-DU07)
PU Jog operation mode
and frequency flicker.
Frequency setting has been
written and completed!!
Output voltage monitor
Displays the present
Parameter and a setting value
flicker alternately.
Parameter write is completed!!
All parameter
Parameter copy
IPM parameter
(Refer to page 132)
is displayed.
: Output frequency at the fault
Energization time.
Fault clear


Table of Contents

   Also See for Mitsubishi Electric FR-F720P-0.75K

Comments to this Manuals

Symbols: 0
Latest comments: