Table of Contents
Advertisement
(2) Clearing procedure
POINT
· The faults history can be cleared by setting "1" in Er.CL Faults history clear.
1.
Screen at power-ON
The monitor display appears.
2.
Press
to choose the parameter
setting mode.
3.
Turn
until
appears.
4.
Press
to read the present set value.
"
"(initial value) appears.
5.
Turn
to change
it to the setting value " ".
6.
Press
to set.
Operation
(faults history clear)
· Press
to read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
Check and clear of the faults history
Display
The parameter
number read
previously appears.
Flicker ··· Faults history clear complete!!
6
133
Advertisement
Table of Contents
