Download  Print this page

Parameter Clear, All Parameter Clear - Mitsubishi Electric FR-F720P-0.75K Instruction Manual

Fr-f700p series.
Hide thumbs

Advertisement

5.7 Parameter clear, all parameter clear

POINT
· Set "1" in Pr. CL parameter clear, ALLC All parameter clear to initialize parameters. (Parameters are not cleared
when "1" is set in Pr. 77 Parameter write selection.)
· Refer to the parameter list on page 87 for the parameters to be cleared with this operation.
Operation
1.
Screen at power-ON
The monitor display appears.
2.Operation mode setting
Press
to choose the PU operation
mode.
3.
Press
to choose the parameter
setting mode.
4.
Turn
until "
appears.
5.
Press
to read the currently set value.
"
"(initial value) appears.
6.
Turn
to change it to
the setting value " ".
7.
Press
to set.
· Turn
· Press
· Press
and
The inverter is not in the PU operation mode.
1. Press
2. Carry out operation from step 6 again.
", "
"
Flicker ··· Parameter setting complete!!
to read another parameter.
to show the setting again.
twice to show the next parameter.
are displayed alternately ... Why?
.
is lit and the monitor (4-digit LED) displays "0" (Pr. 79 = "0" (initial value)).
Parameter clear, all parameter clear
Display
PU indicator is lit.
The parameter
number read
previously appears.
Parameter clear All parameter clear
Parameter clear
All parameter clear
79
5 5

Advertisement

Table of Contents

   Also See for Mitsubishi Electric FR-F720P-0.75K

Comments to this Manuals

Symbols: 0
Latest comments: