Check and clear of the faults history
6.5 Check and clear of the faults history
(1) Check for the faults history
[Operation panel is used
The cumulative energization time and actual operation time are accumulated from 0 to 65535 hours, then cleared, and accumulated again
from 0. When the operation panel (FR-DU07) is used, the time is displayed up to 65.53 (65530h) in the indication of 1h = 0.001, and
thereafter, it is added up from 0.
[Operation for displaying faults history]
Eight past faults can be displayed with the setting dial.
(The latest fault is ended by ".".)
When no fault exists,
[Parameter setting change]
Energization time *
Faults history number
(The number of past faults is displayed.)