Table of Contents
Advertisement
Changing example Set "9" (Optimum excitation control) in Pr. 60 Energy saving control selection.
Operation
1.
Screen at power-ON
The monitor display appears.
2.Operation mode setting
Press
to choose the PU operation
mode.
3.
Press
to choose the parameter
setting mode.
4.
Turn
until
appears.
5.
Press
to read the present set value.
"
"(initial value) appears.
6.
Turn
to change it to the set
value "
".
7.
Press
to set.
8.
Perform normal operation.
When you want to check the energy saving effect,
refer to Chapter 4 of the Instruction Manual (Applied)
to check the energy saving effect monitor.
(Pr. 60)
Flicker ··· Parameter setting complete!!
· By turning
, you can read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
Energy saving operation (Pr. 60) <V/F>
Display
PU indicator is lit.
The parameter
number read
previously appears.
5
77
Advertisement
Table of Contents
