Mitsubishi Electric FR-F720P-0.75K Instruction Manual page 91

Parameter list
Frequency setting with terminals (contact input)
Function assignment of external terminal and control
Function assignment of external terminal and control
Function assignment of external terminal and control
Function assignment of external terminal and control
Function assignment of external terminal and control
Function assignment of external terminal and control
Function assignment of external terminal and control
IPM motor control
IPM motor control
IPM motor control
Limiting the output frequency
Limiting the output frequency
Misoperation prevention and parameter setting restriction
Misoperation prevention and parameter setting restriction
Misoperation prevention and parameter setting restriction
Misoperation prevention and parameter setting restriction
Misoperation prevention and parameter setting restriction
Monitor display and monitor output signal
Monitor display and monitor output signal
Monitor display and monitor output signal
Monitor display and monitor output signal
Motor brake and stop operation
Motor brake and stop operation
Motor brake and stop operation
Motor brake and stop operation
Motor brake and stop operation
Motor noise suppression and measures against EMC and leakage current
Motor noise suppression and measures against EMC and leakage current
Operation selection at power failure and instantaneous power failure
84
— Remote setting function (Pr.59)
— Condition selection for the
second functions activation (RT signal) (Pr.155)
— Function assignment of input terminals (Pr.178 to Pr.189)
— Function assignment of output terminals (Pr.190 to Pr.196)
— Logic selection of the output stop signal (MRS) (Pr.17)
— Pulse train output of output power (Y79 signal) (Pr.799)
— Remote output function (REM signal) (Pr.495 to Pr.497)
— Start signal selection (Pr.250)
— Control method selection (Pr.800)
— IPM parameter initialization (Pr.998)
— Proportional gain setting for speed loops (Pr.820, Pr.821)
— Avoiding the mechanic resonance points
(frequency jump) (Pr.31 to Pr.36)
— Maximum/minimum frequency (Pr.1, Pr.2, Pr.18)
— Displaying necessary
parameters only (user group) (Pr.160, Pr.172 to Pr.174)
— Password function (Pr.296, Pr.297)
— Prevention of parameter rewrite (Pr.77)
— Reset selection and disconnected PU detection (Pr.75)
— Reverse motor rotation prevention (Pr.78)
— Adjustment of terminal FM and AM
(calibration) (C0(Pr.900), C1(Pr.901))
— Changing DU/PU monitored items and clearing cumulative monitors (Pr.52,
Pr.170, Pr.171, Pr.268, Pr.563, Pr.564, Pr.891)
— Changing the monitored item to be output from terminal FM/AM
(Pr.54 to Pr.56, Pr.158, Pr.867)
— Speed display and speed setting (Pr.37, Pr.144, Pr.505)
— Coast to stop at the specified frequency or lower (Pr.522)
— DC injection brake (Pr.10 to Pr.12)
— Decelerate the motor to a stop at instantaneous
power failure (Pr.261 to Pr.266)
— Motor stop method and start signal selection (Pr.250)
— Regeneration unit selection (Pr.30, Pr.70)
— Carrier frequency and Soft-PWM selection (Pr.72, Pr.240, Pr.260)
— Reducing mechanic resonance
(speed smoothing control) (Pr.653, Pr.654)
— Automatic restart after instantaneous power failure/flying start (Pr.57, Pr.58,
Pr.162 to Pr.165, Pr.299, Pr.611)
95
103
104
105
89
111
110
106
111
115
111
92
87
103
108
97
97
97
114
93
93
92
110
89
107
106
91
96
111
94