Printer And Pc Connection - Panasonic KX-TA624 Installation Manual

2.3.9

Printer and PC Connection

A user-supplied printer or personal computer (PC) can be
connected to the system. These are used to print out or refer to the
SMDR call records and system programming data.
Connect the printer cable or the PC cable to the Serial Interface
(RS-232C) connector. The cable must be shielded and the
maximum length is 2 m {6.5 feet}.
Serial Interface
(RS-232C) (D-SUB, 9-pin)
Arrange the cables so that the printer will be connected to the
system as shown in the appropriate chart on the following page.
The pin configuration of the Serial Interface (RS-232C) Connector
is as follows.
Pin
Signal name
no.
2 RXD Received Data
TXD
3 Transmitted Data
4 DTR Data Terminal Ready
5 SG
Signal Ground
6 DSR Data Set Ready
7 RTS
Request To Send
8 CTS Clear To Send
Printer or
Circuit type
EIA
BB
BA
CD
AB
CC
CA
CB
Computer
CCITT
104
103
108.2
102
107
105
106
Installation 2-17