001
42
l
Manager Programming
System Speed Dialing Number Set
Description
Used to program the System
are available to all extension
through 99.
Selection
Default
All speed dial numbers - Not stored
Programming
1.
Enter 001.
Speed Dial numbers.
These numbers
users. There are 100 numbers from 00
l
Speed dial number: 00 through 99
l
Telephone number: 24 digits (max.)
2.
3.
4.
5.
6.
7.
8.
Display: SPD Number Set
Press NEXT.
Display: SPD Code?->
Enter a speed dial number.
To
enter speed dial number
00, you
can also press NEXT.
Display example: 00: Not Stored
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
Press STORE.
To program another speed dial number, press NEXT or
PREV, or SELECT and the desired speed dial number.
Repeat steps 4 through 6.
Press END.
Conditions
l
There is a maximum of 100 speed dial numbers.
Each speed dial
number has a maximum of 24 digits.
The valid characters
are 0
through
9, *
,
and # keys,
FLASH,
PAUSE, SECRET
and -
(hyphen) buttons.
- To
store the flash signal, press FLASH.
Note:
The stored flash will be in effect only during an
established
call. (Refer to Section 3 "External
Feature
Access.")
- To store a hyphen, press the "-" button.
4-16
System Programming