Direct In Lines (Dil); Direct Inward System Access (Disa) - Panasonic KX-TD816 Installation Manual

D
Features
_
Direct In Lines (DIL)
Description
Enables an incoming CO call to go directly to one or more
answering points.
DIL 1:
1
puts an incoming CO call to a single destination.
Assignable destinations are:
(
1)
extension;
(2)
modern:!:; (3)
external pager: (4)
DISA's message.
This CO line
can be used by
multiple extension users to make calls but can be used by only one
extension to receive calls.
DIL 1:N puts an incoming CO call to multiple destinations.
Assignable destinations are extensions only. This CO line can be
used by multiple extension users to make and receive calls.
Both DIL 1: 1 and 1 :N can have different destinations for day and
night modes (Night Service).
Conditions
l
If a CO
line is programmed for both DIL
1: 1
and
DIL l:N. it is
regarded as a DIL 1:
I
line.
l
DIL 1:
1
to the modem* allows the caller to perform remote
administration. DIL 1:
1
to an external pager sounds the pager when
receiving incoming calls (TAFAS feature). DIL 1:
I
to
DISA message
allows an external caller to access the system directly (DISA feature).*
Programming References
Section 4, System Programming,
[407]-[408] DIL 1: 1 Extension - Day / Night
[603]-[604] DIL 1 :N Extension and Delayed Ringing - Day / Night
Feature References
None
Operation References
Not applicable.
Direct Inward System Access (DISA)*
Description
Allows a CO caller to access specific system features as if the
caller is an extension in the system. The-caller can have direct
access to features such as:
l
Placing an intercom call to an extension, an operator, a
modem (for remote system administration) or an external
pager (for TAFAS).
l
Calling an external party
For external calling, it is necessary to program either Non
Security or CO Line Security mode. In Non Security
3-48
Features
*: Available for KX-TD 1232 only.