Checking The Oil Cooler; Installing The Oil Cooler - Yamaha FJR1300R Service Manual

OIL COOLER
EAS00458

CHECKING THE OIL COOLER

1. Check:
• oil cooler
Cracks/damage → Replace.
2. Check:
• oil cooler inlet hose
• oil cooler outlet hose
Cracks/damage/wear → Replace.
EAS00459

INSTALLING THE OIL COOLER

1. Clean:
• mating surfaces of the oil cooler and the
crankcase
(with a cloth dampened with lacquer thin-
ner)
2. Install:
• O-ring
New
• oil cooler
NOTE:
@
Make sure the O-ring is positioned properly.
3. Fill:
• cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" in
chapter 3.
• crankcase
(with the specified amount of the recom-
mended engine oil)
Refer to "CHANGING THE ENGINE OIL" in
chapter 3.
6 - 6
COOL
12 Nm (1.2 m · kg, 8.7 ft · lb)