SHIFT SHAFT
EAS00329
CHECKING THE SHIFT SHAFT
1. Check:
• shift shaft 1
• shift shaft pawl 2
Bends/damage/wear → Replace.
• shift shaft spring 3
Damage/wear → Replace.
EAS00330
CHECKING THE STOPPER LEVER
1. Check:
• stopper lever 1
Bends/damage → Replace.
• Roller turns roughly → Replace the stopper
lever.
• stopper lever spring 2
Damage/wear → Replace.
EAS00331
INSTALLING THE SHIFT SHAFT
1. Install:
• stopper lever 1
• stopper lever spring 2
NOTE:
@
• Hook the ends of the stopper lever spring
onto the stopper lever and the crankcase
boss 3.
• Mesh the stopper lever with the shift drum
segment assembly.
2. Install:
• shift shaft 1
NOTE:
@
• Lubricate the oil seal lips with lithium soap
base grease.
• Hook the end of the shift shaft spring onto
the shift shaft spring stopper 2.
5 - 56
ENG