CRANKCASE
2. Apply:
• sealant
(onto the crankcase mating surfaces)
Quick Gasket
ACC-11001-05-01
NOTE:
@
Do not allow any sealant to come into contact
with the oil gallery or crankshaft journal bear-
ings. Do not apply sealant to within 2 ~ 3 mm
(0.08 ~ 0.12 in) of the crankshaft journal bear-
ings.
3. Install:
• dowel pins
4. Set the shift drum assembly and transmis-
sion gears in the neutral position.
5. Install:
• lower crankcase 1
(onto the upper crankcase 2)
CAUTION:
@
Before tightening the crankcase bolts,
make sure the transmission gears shift cor-
rectly when the shift drum assembly is
turned by hand.
5 - 88
ENG
®