Yamaha FJR1300R Service Manual page 529

High beam indicator light
Tester positive probe → yellow 4
Tester negative probe → black/white 5
Meter assembly coupler
R/G B/W Br/R
R/W G/W Y/L Lg
• Set the main switch to "ON".
• Set the dimmer switch to "
• Measure the voltage (12 V) of green on the
headlight coupler.
• Is the voltage within specification?
YES
This circuit is OK.
W
Y Ch Dg L
" or " ".
NO
The wiring circuit
from the main switch
to the headlight cou-
pler is faulty and
must be repaired.
8 - 33
LIGHTING SYSTEM
EAS00789
2. The meter light fails to come on.
1. Meter light bulb and socket
• Check the meter light bulb and socket for
continuity.
• Are the meter light bulb and socket OK?
YES
2. Voltage
• Connect the pocket tester (DC 20 V) to the
meter assembly coupler as shown.
Tester positive probe → blue 1
Tester negative probe → black/white 2
R/G B/W
R/W G/W Y/L Lg
• Set the main switch to "ON".
• Measure the voltage (12 V) of blue 1 on
the meter assembly coupler.
• Is the voltage within specification?
YES
This circuit is OK.
– +
ELEC
NO
Replace the meter
light bulb, socket or
both.
Br/R W
Y Ch Dg L
NO
The wiring circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be
repaired.