Yamaha FJR1300R Service Manual page 59

Tool No.
40 and 50 mm bearing driver
40 and 50 mm bearing
Water pump seal installer
driver
YM-04058
Water pump seal
installer
These tools are needed to install the
YM-33221
water pump seal.
Universal clutch holder
YM-91042
This tool is needed to hold the clutch
when removing or installing the clutch
boss nut.
Spring compressor push plate
YM-33286
This tool is needed when removing or
installing the damper spring.
Valve guide remover (ø5)
YM-04097
This tool is needed to remove and
install the valve guide.
Valve guide installer (ø5)
YM-04098
This tool is needed to install the valve
guide.
Valve guide reamer (ø5)
YM-04099
This tool is needed to rebore the new
valve guide.
Piston ring compressor
YM-08037
This tool is used to compress the piston
rings when installing the piston into the
cylinder.
Dynamic spark tester
YM-34487
This tool is used to check the ignition
system components.
SPECIAL TOOLS
Tool name/Function
1 - 41
GEN
INFO
Illustration