SHAFT DRIVE
EAS00727
CHECKING THE DRIVE SHAFT
1. Check:
• drive shaft splines
Damage/wear → Replace the drive shaft.
EAS00728
INSTALLING THE UNIVERSAL JOINT AND
FINAL DRIVE ASSEMBLY
1. Lubricate:
• universal joint splines
• drive shaft splines
Recommended lubricant
Lithium soap base grease
2. Install:
• universal joint
• final drive assembly
NOTE:
Align the drive shaft splines with the driven
yoke of the universal joint.
3. Tighten:
• final drive assembly nuts
4. Install:
• shift arm 1
NOTE:
Align the punch mark a in the shift shaft with
the slot in the shift arm.
5. Install:
• rear wheel
Refer to "REAR WHEEL AND BRAKE
DISC".
6. Fill:
• final drive assembly
Refer to "CHECKING THE FINAL DRIVE
OIL LEVEL" in chapter 3.
7. Check:
• shift pedal position
Refer to "ADJUSTING THE SHIFT PEDAL"
in chapter 3.
4 - 113
CHAS
42 Nm (4.2 m · kg, 30 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)