HANDLEBARS
EAS00667
REMOVING THE HANDLEBARS
1. Stand the motorcycle on a level surface.
WARNING
@
Securely support the motorcycle so that
there is no danger of it falling over.
2. Remove:
• handlebar grip
NOTE:
@
Blow compressed air between the left handle-
bar and the handlebar grip, and gradually push
the grip off the handlebar.
3. Remove:
• throttle cable housing 1
• throttle grip 2
NOTE:
@
While removing the throttle cable housing, pull
back the rubber cover 3.
EAS00669
CHECKING THE HANDLEBARS
1. Check:
• left handlebar 1
• right handlebar 2
Bends/cracks/damage → Replace.
WARNING
@
Do not attempt to straighten bent handle-
bars as this may dangerously weaken
them.
4 - 74
CHAS