EAS00716
Troubleshooting chart
When causes (A) or (B) shown in the table at the beginning of the "TROUBLESHOOTING" section
exist, check the following points.
Place the motorcycle on a suitable stand so
that the front wheel is elevated and then
spin the front wheel. Is the wheel bearing
damaged?
Place the motorcycle on a suitable stand so
that the rear wheel is elevated and then spin
the rear wheel. Is the wheel bearing dam-
aged?
Remove the rear wheel. Is the wheel bear-
ing damaged?
Remove and check the drive shaft compo-
nents.
YES Replace the wheel bearing.
NO
NO
YES
YES Replace the rear wheel bearing.
NO
4 - 95
SHAFT DRIVE
Refer to "FRONT WHEEL AND BRAKE
DISCS".
Rear wheel bearings and shaft drive bear-
ings are probably not damaged. Repeat the
test or remove and check the components.
Refer to "REAR WHEEL AND BRAKE
DISC".
CHAS