VALVES AND VALVE SPRINGS
3. Remove:
• valve cotters 1
NOTE:
@
Remove the valve cotters by compressing the
valve spring with the valve spring compressor
set 2 and attachment 3.
4. Remove:
• upper spring seat 1
• valve spring 2
• valve 3
• oil seal 4
• lower spring seat 5
NOTE:
@
Identify the position of each part very carefully
so that it can be reinstalled in its original place.
EAS00239
CHECKING THE VALVES AND VALVE
GUIDES
The following procedure applies to all of the
valves and valve guides.
5 - 25
ENG
Valve spring compressor set
YM-03153
Attachment
YM-04108