Yamaha FJR1300R Service Manual page 113

Ò Support the throttle cables with the T-bar located
behind the cable guide.
Ó Pass the throttle cables under spark plug leads
#1, #2, #3, and #4, and the wire harness, head-
light lead, main switch lead, right handlebar
switch lead, and left handlebar switch lead.
Install the thermostat, heat protector, throttle
cables, spark plug leads, wire harnesses, and
air cut-off valve under the cable guide in the
respective order.
CABLE ROUTING
Ô To the left slit of the plate
2 - 53
SPEC