Yamaha FJR1300R Service Manual page 409

CONNECTING RODS AND PISTONS
5 - 100
4. Lubricate:
• piston
• piston rings
• cylinder
(with the recommended lubricant)
Recommended lubricant
Engine oil
5. Lubricate:
• bolt threads
• nut seats
(with the recommended lubricant)
Recommended lubricant
Molybdenum disulfide grease
6. Lubricate:
• crankshaft pins
• big end bearings
• connecting rod inner surface
(with the recommended lubricant)
Recommended lubricant
Engine oil
7. Install:
• big end bearings
• connecting rod assembly 1
(into the cylinder and onto the crankshaft
pin)
• connecting rod cap
(onto the crankshaft pin)
NOTE:
@
• Align the projections on the big end bearings
with the notches in the connecting rods and
connecting rod caps.
• Be sure to reinstall each big end bearing in
its original place.
• While compressing the piston rings with pis-
ton ring compressor 2, install the connecting
rod assembly into the cylinder with the other
hand.
ENG