Assembling And Installing The Rear Brake Caliper - Yamaha FJR1300R Service Manual

FRONT AND REAR BRAKES
6. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the proper
level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
7. Check:
• brake lever operation
Soft or spongy feeling → Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS00642
ASSEMBLING AND INSTALLING THE
REAR BRAKE CALIPER
WARNING
@
• Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
• Never use solvents on internal brake
components as they will cause the piston
seals to swell and distort.
• Whenever a brake caliper is disassem-
bled, replace the brake caliper piston
seals.
1. Lubricate:
• wheel axle
4 - 42
CHAS
Recommended brake fluid
DOT 4
Recommended lubricant
Lithium soap base grease