Installing The Front Wheel - Yamaha FJR1300R Service Manual

FRONT WHEEL AND BRAKE DISCS
4 - 6
4. Adjust:
• brake disc deflection
M MMM M MMM M M MMM M M MMM M
a. Remove the brake disc.
b. Rotate the brake disc by one bolt hole.
c. Install the brake disc.
NOTE:
@
Tighten the brake disc bolts in stages and in a
crisscross pattern.
Brake disc bolt
18 Nm (1.8 m · kg, 13 ft · lb)
®
LOCTITE
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be
brought within specification, replace the
brake disc.
L LLL L LLL L L LLL L L LLL L
EAS00545

INSTALLING THE FRONT WHEEL

The following procedure applies to both brake
discs.
1. Lubricate:
• wheel axle
• oil seal lips
Recommended lubricant
Lithium soap base grease
2. Tighten:
• wheel axle 1
72 Nm (7.2 m · kg, 52 ft · lb)
• wheel axle pinch bolt 2
23 Nm (2.3 m · kg, 17 ft · lb)
CAUTION:
@
Before tightening the wheel axle nut, push
down hard on the handlebars several times
and check if the front fork rebounds
smoothly.
CHAS
M MMM M M MMM M MMM
L LLL L L LLL L LLL