Removing The Pickup Coil Rotor; Installing The Pickup Coil Rotor - Yamaha FJR1300R Service Manual

PICKUP COIL ROTOR

REMOVING THE PICKUP COIL ROTOR

1. Remove:
• pickup coil rotor cover 1
NOTE:
@
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
2. Remove:
• pickup coil rotor bolt 1
• washer
• pickup coil rotor 2
NOTE:
@
While holding the generator rotor 3 with the
primary sheave holder 4, remove the pickup
coil rotor bolt.
Primary sheave holder
YS-01880-A

INSTALLING THE PICKUP COIL ROTOR

1. Install:
• pickup coil rotor 1
• washer
• pickup coil rotor bolt
NOTE:
@
Align the projection a into the pickup coil rotor
with the groove b into the crankshaft.
5 - 42
ENG