Checking The Oil Cooler; Installing The Oil Cooler - Yamaha TMAX XP530E-A 2017 Service Manual

EAS30441

CHECKING THE OIL COOLER

1. Check:
• Oil cooler
Cracks/damage  Replace.
2. Check:
• Oil cooler inlet hose
• Oil cooler outlet hose
Cracks/damage/wear  Replace.
EAS30442

INSTALLING THE OIL COOLER

1. Clean:
• Mating surfaces of the oil cooler and the
crankcase
(with a cloth dampened with lacquer thinner)
2. Install:
• Gasket
New
• Oil cooler "1"
• Oil filter cartridge union bolt "2"
Oil filter cartridge union bolt
40 N·m (4.0 kgf·m, 30 lb·ft)
TIP
• Make sure that the gasket is positioned proper-
ly.
• Align the projection "a" on the oil cooler with the
slot "b" in the crankcase.
a
b
3. Install:
• Oil filter cartridge
Oil filter wrench
90890-01426
Oil filter wrench
YU-38411
Oil filter cartridge
17 N·m (1.7 kgf·m, 13 lb·ft)
Refer to "CHANGING THE ENGINE OIL" on
page 3-27.
4. Fill:
• Cooling system
5. Check:
6. Measure:
2
1
6-6
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" on
page 3-31.
• Crankcase
(with the specified amount of the recom-
mended engine oil)
Refer to "CHANGING THE ENGINE OIL" on
page 3-27.
• Cooling system
Leaks  Repair or replace any faulty part.
Refer to "INSTALLING THE RADIATOR" on
page 6-3.
• Radiator cap valve opening pressure
Below the specified pressure  Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR" on
page 6-3.
OIL COOLER