Yamaha FJR1300R Service Manual page 165

CHANGING THE COOLANT
8. Check:
• copper washer 1 (coolant drain bolt 2)
Damage → Replace.
9. Install:
• coolant drain bolt
10.Connect:
• coolant reservoir hose
11.Fill:
• cooling system
(with the specified amount of the recom-
mended coolant)
Recommended antifreeze
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
WARNING
@
• If coolant splashes in your eyes, thor-
oughly wash them with water and consult
a doctor.
• If coolant splashes on your clothes,
quickly wash it away with water and then
with soap and water.
• If coolant is swallowed, induce vomiting
and get immediate medical attention.
3 - 49
CHK
ADJ
10 Nm (1.0 m · kg, 7.2 ft · lb)
High-quality ethylene
antifreeze containing corrosion
inhibitors for aluminum engines
Mixing ratio
1 : 1 (antifreeze : water)
Quantity
Total amount
3.2 L (2.82 Imp qt, 3.38 US qt)
Coolant reservoir capacity
0.485 L (0.43 Imp qt, 0.51 US qt)
From minimum to maximum
level mark
0.15 L (0.13 Imp qt, 0.16 US qt)
glycol