MIDDLE GEAR
EAS00432
REMOVING THE MIDDLE GEAR
1. Straighten the punched point of the middle
driven shaft nut.
2. Loosen:
• middle driven shaft nut 1
NOTE:
While holding the middle drive shaft 2.
3. Straighten the lock washer tab.
4. Loosen:
• middle drive shaft nut 1
NOTE:
While holding the middle drive shaft 2.
5. Straighten the punched point of the middle
drive shaft bearing retainer.
6. Loosen:
• bearing retainer 1
(with the middle drive shaft retainer wrench
2)
Middle drive shaft retainer
wrench
YM-04057
5 - 69
ENG