Yamaha FJR1300R Service Manual page 109

È To the radiator fan
É Pass the wire harness, stator coil lead, coolant
reservoir hose, and
breather hose through the left slit of the plate.
Ê To the right side of the frame
Ë Clamp the wire harness with the plastic band
attached to the frame.
Ì To the fuel tank
Í Pass the stator coil lead at the fork of the wire
harness.
thermostat assembly
2 - 49
CABLE ROUTING
Î Attach the clutch cable to the frame using the
clutch cable holders.
Ï Insert the harness holder into the hole on the
rear end of the frame.
Ð Pass the brake cable through the brake cable
guide.
Ñ To the wire harness
Ò Contact the clutch cable to the turn stopper.
SPEC