Yamaha FJR1300R Service Manual page 106

Ñ Support the coolant reservoir hose and coolant
reservoir breather hose with the hose holder
located under the coolant reservoir.
Ò Pass the coolant reservoir hose through the hole
of the coolant reservoir hose guide. The end of
the coolant reservoir hose should extend at least
50 mm (2.0 in) from the hose guide.
Ó Fasten the spark plug lead #1 and #4 at the
number tag.
CABLE ROUTING
Ô Pass the wire harness, spark plug leads #1, #2,
#3, and #4 through the right slit of the battery
bracket.
Õ Pass the starter motor lead, negative battery
lead, wire harness and spark plug leads #2 and
#3 through the battery stay. Be sure to pass the
starter motor lead and negative battery lead on
the battery stay side.
2 - 46
SPEC