Standard Cmos Setup - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

6.01.4 STANDARD CMOS SETUP

This part of the setup allows you to set the time, date, hard disk type, types of floppy
drives and video type.
Date/Time
The current values for each category are displayed. Enter new values through the
keyboard.
Hard Disks
Two IDE controllers are defined on the TEK-AT4LVG board (Primary and Secondary),
each can have two disks: Master Disk (bootable) or Slave Disk.
Drive A / Drive B
Select the category identifying the types of floppy disk drive A or drive B that have been
installed in the computer.
Video
This option specifies the basic type of display adapter card installed in the system.
Halt on
This option specifies the type of errors that will stop the system during the BIOS booting
procedure. The settings are All errors, No errors, All but keyboard (default setting), All
but diskette and All but disk/key.
Memory
This display-only option determines the amount of Base, Extended and other types of
memory installed in the system.
Software Setup 6-8