Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual page 146

ERROR NUMBER
(HEX) (DECIMAL)
1C 28
1D 29
1E 30
1F 31
20 32
21 33
22 34
23 35
24 36
25 37
26 38
27 39
28 40
29 41
2A 42
2B 43
2C 44
2D 45
2E 46
2F 47
30 48
31 49
32 50
DESCRIPTION
Flash content does not verify with source
No device found in specified starting socket
Cannot create a Flash disk of specified size
Communication error when reading Flash identification
code
Cannot use 8086 or 8088 CPU with Flash memory
No serial port or card attached for transfer
/S switch not supported with this BIOS
/G:group value on command line is invalid
Insufficient Flash or EPROM space to include the volume
label entry
Cannot make EPROM
[destination] path
EPROM filename already exist
EPROM filename path not found
Selected drive for EPROM files not ready
Invalid EPROM filename or disk error
Not enough disk space to copy EPROM files
Not enough memory for data buffer
Command line option "/TEKXXX" is invalid
486SLC internal registers are different from BIOS setup
The 486SLC cache is not disabled over the Flash device(s)
Unable to erase the nth device
No VIPer BIOS found
The source diskette must be DOS Version 4 and up
Flash ID command to BIOS or data Flash must be issued
first
with same [source]
VFLASH Software
and
12-25