Vip-Up First Screen - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

6.02.2 VIP-UP FIRST SCREEN

TEKNOR MICROSYSTEMS INC --- VIPer SETUP
TEKNOR BIOS Extension Address
TEKNOR BIOS Window Adress
On Board SCSI BIOS
SCSI BIOS Address
SCSI Base I/O Address (W22)
SCSI ID Select
SCSI IRQ Channel (W18)
SCSI DMA Channel (W17 & W23)
SCSI Parity
SCSI Disconnect
SCSI Synchronous Negociation
SCSI Floptical Drive Support
SCSI Compatibility Mode
↑↓ to select options
PgDn(+), PgUp(-) to change an option
There are two parts to the screen:
1. Selection of TEKNOR BIOS addresses: The addresses of the TEKNOR BIOS
extension and the TEKNOR BIOS window are set in the top part of the screen.
2. On Board SCSI BIOS: This option allows the user to enable or disable the on board
SCSI controller. Once the controller is enabled, all other SCSI options can be defined
by associating to them the desired value.
Software Setup 6-16
C8000H-CBFFFH
CC000H-CFFFFH
Enabled
D8000H-DBFFFH
340H (Default BIOS)
ID7 (Default)
IRQ11
DMA 0
Enabled
No Disconnect
Respond Only
Enabled
6360 Features
ESC - Quit without saving
F10 - (U)pdate Flash BIOS