Fan Connector (J1) - Pinout; Fan Connector - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

7.02

FAN CONNECTOR

The #1 component on Diagram 7-1 is for connecting a CPU fan. Its pinout is as follows:
TABLE 7-1: Fan Connector (J1) - Pinout
Pin Number
1
2
The following list includes approved vendors for the J1 connector's mating parts:
Leoco 2530 S020013 (housing),
Leoco 2533 TCB00A0 (crimp);
Molex 22-01-3027 (housing),
Molex 08-50-0114 (crimp).
Signal
+12V
GND
Installing and Working With System Components 7-5