13.03.1
USING MEMCARD MENU OPTIONS
To use the MEMCARD program with the menu options, follow these steps:
1. Type MEMCARD at the command prompt. The main menu appears as follows:
PC Memory Card Setup Program Version 2.00
Memcard Options
Current memory card slot: 1 of 2 slots
Choose one of the following:
1. Create and format a new partition
2. Format an existing partition
3. Delete a partition
4. Display partition information
5. Erase entire memory card
6. Check memory card and fix errors
7. Select next memory card slot
Enter your choice. [4]
To quit Memcard, press ESC.
If your computer includes only one memory card slot, option 7 will not appear on the
main menu.
To choose a menu option, type its number and then press ENTER. When you choose
menu options 1 through 6, another menu appears. To return to the main menu, press
ESC. To quit MEMCARD, return to the main menu and press ESC.
2. To create and format an MS-Flash read/write partition, select 1 from the menu. A
Create and Format a New Partition screen such as the following appears:
Current memory card slot: 1
Letter
---------------------------------------------------------
D
FLASH FILE SYSTEM II
(C) 1991-1992 Microsoft Corporation
Type
Status
MS-Flash
Formatted
13-6
Size
2048K