Floppy Software Setup - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

8.02.4 FLOPPY SOFTWARE SETUP

AWARD Setup
Starting from the AWARD Setup program's main menu, use the following procedure to
complete the setup:
• From the Main Menu, select the Standard CMOS Setup option.
• In the Standard CMOS Setup menu, use the arrow keys to highlight the Drive A: or
Drive B: option (depending on the installation of your Floppy drive).
− Select the category identifying the types of Floppy disk drive A or drive B that have
been installed in the computer.
None
360KB, 5.25 in.
1.2MB, 5.25 in.
720KB, 3.5 in.
1.44MB, 3.5 in.
2.88MB, 3.5 in.
Installing IDE, Floppy & SCSI Devices
No Floppy drive installed.
5-1/4 inch PC-type standard drive; 360KB capacity.
5-1/4 inch AT-type high-density drive; 1.2MB capacity.
3-1/2 inch double-sided drive; 720KB capacity.
3-1/2 inch double-sided drive; 1.44MB capacity.
3-1/2 inch double-sided drive; 2.88MB capacity.
8-12