Batch Mode Error Codes - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

12.06.3 BATCH MODE ERROR CODES

The following error messages are returned by the VFLASH Batch Mode function. They
can be detected with a DOS errorlevel condition.
ERROR NUMBER
(HEX) (DECIMAL)
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
A 10
B 11
C 12
D 13
E 14
F 15
10 16
11 17
12 18
13 19
14 20
15 21
16 22
17 23
18 24
19 25
1A 26
1B 27
VFLASH Software
DESCRIPTION
No error
Bad command line
Invalid drive choice for recovering boot information
Unable to establish communication (serial download mode
only)
No Flash memory found (verify jumper)
Mixed memory types detected in Flash bank
Unable to find system files on specified disk
Specified output file already exists
Error reading transfer source drive
Insufficient data space or directory space to copy all
desired files
Bad checksum (problem with serial link)
Non Hex code received (problem with serial link)
Error transferring data. Unusable Flash drive
No files to transfer in selected directory
Unable to open a file to be copied
Media not yet supported
Communications or device error while transferring files.
Unusable flash drive.
Unable to read transfer source drive
Insufficient Flash space to store files
Unrecognized Flash device type
Programming failure on devices
Cannot select any file from actual Flash disk
Unable to find source files
Cannot specify starting device on remote system
Cannot find starting Flash bank address
Communication error while reading Flash bank content
External device cannot be erased properly
Unsupported serial download function
12-24