Static Electricity Precautions; Installing System Memory - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

3.01

STATIC ELECTRICITY PRECAUTIONS

Static electricity can damage a board ; the following precautions should be taken
whenever you handle the TEK-AT4LVG:
• Keep the board in its anti-static package, until you are ready to install it.
• Touch a grounded surface before removing the board from its package or wear a
grounding wrist strap; this will discharge any static electricity that may have built
upon your body.
• Handle the board by the edges.
• When handling the board, touch a grounded surface often or wear a grounding wrist
strap.

Installing System Memory

3-3