Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual page 121

PARALLEL PORT DETECTION
This option enables access to the printer port(s) as a Power Management event.
HARD DISK I/O DETECTION
This option enables access to the hard drive(s) as a Power Management event.
DMA/ISA MASTER DETECTION
When Enabled, the system will monitor system requests to move memory as Power
Management events.
NON MOTHERBOARD MEMORY
This option enables access to non Motherboard memory as a Power Management event.
VIDEO MEMORY (BLOCK A,B)
This option is always enabled and permits the monitoring of video refresh events as Power
Management events.
I/O ADDRESS DETECTION
This option enables access to a specific I/O address range as a Power Management event.
The settings are Disable, 300H, 310H, 320H, 330H, 340H, 350H, 360H, 370H, 380H,
390H, 3A0H, 3B0H, 3C0H, 3D0H and 3E0H.
VESA MASTER DETECTION
This option enables access to the VESA Bus as a Power Management event.
Setting Power Management Modes 11-4