Vga Connector (J14) - Pinout; Vga Connector - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

10.02.2

VGA CONNECTOR

Connecting CRT video to the TEK-AT4LVG is simple. Merely connect the standard
VGA DB15 male connector to the board's J14 high density, right angle, female connector.
See Diagram 10-1 for the location of J14.
The VGA connector's pinout appears in Table 10-1.
TABLE 10-1: VGA Connector (J14) - Pinout
Pin Number Signal
1 RED
2 GREEN
3 BLUE
4 NotUsed
5 GND
Pin Number Signal
6 GND
7 GND
8 GND
9 Not Used
10 GND
Pin Number Signal
11 Not Used
12 Not Used
13 HSYNC
14 VSYNC
15 Not Used
Installing Video 10-5