Installing Tek-At4Lvg In Passive Backplane - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

5.01

INSTALLING TEK-AT4LVG IN PASSIVE BACKPLANE

The TEK-AT4LVG AT Single Board Computer will work with any standard ISA passive
backplane. For more information on the installation procedure, please consult the passive
backplane's documentation.
Note that the installation into a passive backplane is optional. The TEK-AT4LVG can be
used as a stand-alone board. In this case, the board must be connected to an external
power source through the External Power Connector (J12).
The following list includes approved vendors for the J12 connector's mating parts:
Leoco 2530 S060013 (housing),
Leoco 2533 TCB00A0 (pins);
Molex 22-01-2065 (housing),
Molex 08-50-114 (pins).
Connecting and Powering Up the Board 5-3