Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual page 52

The Main Menu includes the following categories:
Standard CMOS
Setup
BIOS Features
Setup
Chipset Features
Setup
Power Management
Setup
Load Bios
Defaults
Load Setup
Defaults
Password Setting
IDE HDD Auto
Detection
Save & Exit
Exit Without Saving
Software Setup 6-6
This Setup page includes all the items in a standard, AT-compatible
BIOS.
This Setup page includes all the items of AWARD's special enhanced
features.
This Setup page includes all the items of the chipset's special features.
This Setup page sets power conservation options.
The BIOS defaults represent settings which provide the minimum
requirements for your system to operate.
The chipset defaults are settings which provide for maximum system
performance.
Change, set, or disable password. It allows you to limit access to the
system and the Setup, or just to the Setup.
Automatically detect and configure hard disk parameters. This ability
is included in the event you are uncertain of your hard disk's
parameters.
Save CMOS value changes to CMOS and exit Setup.
Abandon all CMOS value changes and exit Setup.