Saving Configurations & Exiting Award Setup - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

6.01.3 SAVING CONFIGURATIONS & EXITING AWARD SETUP
Use one of the following options available from the Main Menu:
Save & Exit
Exit Without Saving
After having modified the AWARD Setup, you can save the
configuration in CMOS RAM, by selecting this option. This
option will not change the values saved in Flash EPROM. To
update the values in Flash, enter the VIP-UP program and
perform a save (F10).
This option is used to exit AWARD Setup without saving the
configuration to CMOS RAM.
Software Setup 6-7