The Award Setup Program; The Award Setup Program; Accessing The Award Setup Program - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

6.01

THE AWARD SETUP PROGRAM

6.01.1 ACCESSING THE AWARD SETUP PROGRAM

The TEK-AT4LVG uses the AWARD Setup program, a setup utility in ROM that is
accessed by pressing the DELETE key at the appropriate time during system boot. This
utility is used to set configuration data in CMOS RAM.
F Before modifying CMOS setup parameters, insure that the W40 BAttery Selection
jumper is installed to enable the CMOS battery back-up (Short pin 1-2 for Internal
Battery, pin 2-3 for External Battery)
To run the AWARD Setup program incorporated in the ROM BIOS:
1. Turn on or reboot the system.
2. Hit the DELETE key before or when the message - "PRESS DEL TO ENTER
SETUP" appears near the bottom of the screen.
3. The main menu appears on the screen.
Software Setup 6-3