Connecting A Floppy Disk - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

5.02

CONNECTING A FLOPPY DISK

The Floppy connector appears on Diagram 5-1 at J4.
DIAGRAM 5-1: Floppy Connector Location
The installation of the floppy drives is done via a standard IBM 34-pin flat ribbon cable
that connects to J4.
The following list includes approved vendors for the J4 connector's mating parts:
Amp 746285-8 [optional strain relief: 499252-6],
Robinson Nugent IDS-C34PK-TG,
Thomas & Betts 622-3430 [optional strain relief: 622-3441].
(34-pin flat cable connector).
DIAGRAM 5-2: Floppy Disk Cable
Connecting and Powering Up the Board 5-4